This post is more than 5 years old
2 Intern
•
214 Posts
0
446
June 8th, 2014 13:00
Moving shelves from CX to NS?
Hi there,
I have a customer that wants to move shelves from a CX4-xxx to a NS480, putting the obvious support issues to one side is there any reason you can do this considering it's the same Clariion under the covers?
Thanks in advance,
Ed
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
June 8th, 2014 13:00
same CX4 backend, don't see any issues. Look at drive matrix OE to make sure that model is supported by the FLARE on NS.
edhoward
2 Intern
•
214 Posts
0
June 8th, 2014 13:00
Do you spend all day one ECN?
Thanks I thought that was the case.
dynamox
9 Legend
•
20.4K Posts
0
June 8th, 2014 13:00
heheh ..no i don't
Rainer_EMC
4 Operator
•
8.6K Posts
0
June 10th, 2014 08:00
Please check with your local EMC customer service team
Apart from firmware issues there might also be an impact to maintenance and the support database