This post is more than 5 years old
28 Posts
0
1818
February 15th, 2011 11:00
how do you verify the firmware level's in CELERRA
I am trying to see if our NAS box is compatable with DataDomain and in the process I need to know what firmware level we are at right now.
What command can I run to verify the firmware levels and Min DD OS.
How do I check what protocol is currently being used also.
Thanks,
No Events found!
MJ991
32 Posts
0
February 15th, 2011 11:00
Log in to control station and check properties of control station..
dynamox
9 Legend
•
20.4K Posts
1
February 15th, 2011 11:00
Control stations is accessible via the GUI and via ssh, it's the same host.
dynamox
9 Legend
•
20.4K Posts
0
February 15th, 2011 11:00
nas_version to see DART version
Data Domain version here:
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/live1/en_US/Offering_Technical/Interoperability_Matrix/NAS_NDMP_InteropMatrix.pdf
nandamuri
28 Posts
0
February 15th, 2011 11:00
I am new to this company here and not sure what the cli host is.
Is there a way to find the firmware level using GUI?