Unsolved
This post is more than 5 years old
2 Posts
0
569
May 9th, 2013 13:00
help required for NS-120
hello,
i have lost my NS-120 cs ip and dont know how to access it, please guide
No Events found!
Unsolved
This post is more than 5 years old
2 Posts
0
569
May 9th, 2013 13:00
hello,
i have lost my NS-120 cs ip and dont know how to access it, please guide
Top
Rainer_EMC
4 Operator
•
8.6K Posts
0
May 9th, 2013 18:00
What do you mean? You forgot it?
If yes locate the serial cable that was shipped with the system and connect to the CS serial port and login there
mirzaim
2 Posts
0
May 10th, 2013 12:00
thanks Rainer, i appreciate your quick responce, i connected my client pc to cs by serial cable but didnt get the output
, i m using putty com1 speed 19000, isnt there any way that i can only change its IP and remain other settings intact or i can reinitialize the box (it is not in production). i will be much thankful to you if you give me some link or procedure which can guide me
thanks
Rainer_EMC
4 Operator
•
8.6K Posts
0
May 11th, 2013 16:00
I can't remember the speed/parity settings but a search here the forum or the knowledgebase should find them
Make sure you use the correct serial port on the CS - it can be a bit confusing - see the installation manual
jslenterprises
5 Posts
0
July 12th, 2015 06:00
19200, 8, 1, no flow control, pc-ANSi. another option if you have a monitor and keyboard attached you can edit the second line of the grub boot, you can delete the redirect for that bootup and you don't have to use the console cable