Unsolved
This post is more than 5 years old
1 Message
0
1298
November 17th, 2016 09:00
Help on server_config and server_log
Hi All,
Please help to get the server logs on celerra 5.6.
What is the path to run server_config and server_config commands.
I need to enable Verbose Logging Levels for NDMP backup failures troubleshooting.
Reagrds,
santosh
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
November 17th, 2016 12:00
most server_* command are in /nas/bin
which is automatically in your path if you login as nasdmin or su - to nasadmin
However there is no server_config command - only a .server_config
which isnt a customer command - it is for customer service and engineering use
I would suggest to first search the knowledgbase on support.emc.com
umichklewis
3 Apprentice
•
1.2K Posts
0
November 18th, 2016 06:00
You can also find a lot of the commands/steps you need here - https://support.emc.com/kb/455323.
You might also want to open a new thread about your NDMP issue - some of us have a lot of NDMP troubleshooting experience on Celerra and VNX.
Hope this helps!