Unsolved
This post is more than 5 years old
121 Posts
0
1245
March 5th, 2012 20:00
fs auto extension failed: no space available to extend
I have a CIFS on NS20 which is getting replicated to a remote NS20 with lower storage capacity.
Now on the remote system I have a 120GB free space left but I am getting the following error and it seems like the replication is not happening even though under the "Replications" tab all status is O.K
fs auto extension failed: no space available to extend XXX (Slot2:133007305)
How can I resolve this issue? After creating some free space can I continue the replication?
I have a few checkpoints which I would like to delete, but the delete task faile with the message "Delete checkpoint failed". Under checkpoints the "state" is active. How can I delete it permanently? It it from Mounts tab?
Appreciate your feedback
SAMEERK1
296 Posts
0
March 6th, 2012 03:00
Hi,
was the source file system extended ? if yes, by what size it was extended.
deleting few checkpoints of a file system will not free up the space from storage pool.
Sameer Kulkarni
Avilt1
121 Posts
0
March 6th, 2012 04:00
Source file system is set for auto extention. How can I find the recent extension size?
How can I resolve this issue as the repliction is happening.
SAMEERK1
296 Posts
0
March 6th, 2012 06:00
check the current size of source and destination file system,
emc197488 refer this solution article from powerlink
Rainer_EMC
4 Operator
•
8.6K Posts
0
March 6th, 2012 06:00
Also Check The Data Mover Logs
Avilt1
121 Posts
0
March 6th, 2012 16:00
Source file system is 4.5TB and the destination is 4.3TB.
The log says "..DMI..sending the complete transfer failed"
Can I continue the replication after resolving the issue?
SAMEERK1
296 Posts
0
March 7th, 2012 01:00
yes, once the issue is resolved you can continue with the replication.
increase the destination FS following the primus article and the replication should restart..