This post is more than 5 years old
23 Posts
0
2024
May 26th, 2014 06:00
Error in nas_schedule code 13690601492
Hi
When I try to delete or create a new schedule, it gives me error 13690601492. Someone had this error? The data are:
#####################################################
System type: NS-120 (Integrated)
Version: 6.0.41-4
#####################################################
Number of data movers: 2 VDMs: 1
server_2: NS-120 6.0.41.4 State:5 Primary
server_3: NS-120 6.0.41.4 State:5 (Standby)
#####################################################
Number of arrays: 1
CKM00103500066: Clariion CX4-120
SPA: Flare 29 Read Cache: 32 Write Cache: 566 OPERATIONAL
SPB: Flare 29 Read Cache: 32 Write Cache: 566 OPERATIONAL
#####################################################
Filesystems: UXFS:2 Checkpoint:10 Total:39
Number of disk vols (LUNs): 10
#####################################################
Replication mode: RepV2 # Replications: 0 # Copies: 0
# of Interconnects: 1 Remote Celerras: 0
#####################################################
Features in use: CIFS: *True* iSCSI: *True* NFS: False
Rep: False SRDF: False DHSM: False
#####################################################
DBCHK State: No errors found
Thanks for all
jithin
91 Posts
0
June 3rd, 2014 02:00
Hi,
This is the summary of article mentioned above (78969)
Issue: Checkpoint creation and refresh not working with time zone set to Brazil/BRT
This issue is caused by mishandling of daylight savings time for the Brazil/BRT time zone settings.
This issue is resolved in VNX OE for File version 7.0.51.0 and NAS code 6.0.55.0
The following workaround can also be performed:
1.Perform a stop of all replication sessions.
2.Adjust the control station time zone to GMT+3.
3.Restart the replication sessions.
Jithin
sameek
60 Posts
0
May 27th, 2014 00:00
Hi
Please check the below KB article were schedule fails due to timezone. This may help you.
https://emc--c.na5.visual.force.com/apex/KB_BreakFix_1?id=kA1700000000Nxu
Thanks
Sameeksha
OctavioPalomino
23 Posts
0
May 29th, 2014 11:00
I cant access to link. Please cut and paste answer.
thanks !!!