Unsolved
This post is more than 5 years old
2 Intern
•
174 Posts
0
1661
July 30th, 2012 23:00
EMC Celerra NX4 SNMP Monitoring
Hi All,
We have EMC Celerra NX4 Storage (Celerra NX4 and Clariion AX4-5F8). I need to monitor storage through SNMP for both Celerra and Clariion? How can i enable SNMP on both celerra and on clariion. kindly Suggest me.
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
July 31st, 2012 01:00
Please take a look at the Using SNMP on Celerra manual on Powerlink
rupal1
433 Posts
0
July 31st, 2012 02:00
The document can be grabbed from http://developer-content.emc.com/downloads/jive_attach_proxy_final.htm?refURL=https://community.emc.com/servlet/JiveServlet/downloadBody/14684-102-1-53773/Using%20SNMPv3%20on%20Celerra.pdf
As far as i my knowledge is concerned if you enable SNMP on the CS and the DM's through the respective commands mentioned in the doc you will be able to monitor your celerra pretty well. For the backend only hardware critical alerts will be polled and no configuration alerts reagarding the backend will trigger.
Thanks
Rupal Rajwar
nikhilprem
5 Posts
0
June 7th, 2015 22:00
Try this link from ManageEngine to monitor EMC Celerra NX4
Monitoring EMC Celerra Network Attached Storage Systems
Hope this helps