Unsolved
This post is more than 5 years old
4 Posts
0
1248
May 15th, 2014 03:00
Current NAS Code NS700G
What is the latest NAS Code version for Celerra NS700G?
No Events found!
Unsolved
This post is more than 5 years old
4 Posts
0
1248
May 15th, 2014 03:00
What is the latest NAS Code version for Celerra NS700G?
Top
harendra_sharma
19 Posts
0
May 15th, 2014 04:00
I have NS702G and CX4-480 in my NAS setup. I want to upgrade the flare code to R30.P526. Also want to upgrade my NAS code to latest.
Current NAS code is 5.6.47. As per Celerra support matrix april 2014 the maximum supported NAS code with CX4-480 is 5.6.52.2, whereas the procedure generator is allowing up to 6.0.x. I have confusion, which document i should trust?
Pls. suggest me the best.
***********
Harendra
Vipin VK
2 Intern
•
812 Posts
1
May 15th, 2014 04:00
It is 6.0.70.4
harendra_sharma
19 Posts
0
May 15th, 2014 04:00
harendra_sharma
19 Posts
0
May 15th, 2014 06:00
no it is
NAS Support Matrix
April, 2014
V14.4
Vipin VK
2 Intern
•
812 Posts
0
May 15th, 2014 06:00
It seems to be in some comparison. As you can see NS80G, NS40G series etc.. are supporting 5.6.x in a case and can support 6.0 as per the table itself. What is the heading for this table in this document ? Is this from procedure generator ?
Rainer_EMC
4 Operator
•
8.6K Posts
0
May 15th, 2014 06:00
That is just a rough overview – please use Elab Navigator to find out whats supported for your specific combination
satyaki.sarkar1
4 Posts
0
May 15th, 2014 07:00
Hi,
We were unable to open E-Labs Navi., that is why I post the query.
Kindly help in the same.
harendra_sharma
19 Posts
0
May 15th, 2014 09:00
E-LAB do not have this model NS-700. can anybody suggest the compatible latest NAS code for it.
Rainer_EMC
4 Operator
•
8.6K Posts
2
May 15th, 2014 10:00
Probably because the NS700G actually reached end-of-service-live in March 2012 (8 years after GA back in 2004)
Anyway – it looks like DART 6.0 was never supported on NS500/700 class machines
DART went to 64 bit in 6.0 which these old data movers don’t support
harendra_sharma
19 Posts
0
August 24th, 2014 02:00
may you share any document which can confirm that the 6.0.x is not made for NS700G. Or any letest support matrix verifying it.
Becuz Procedure generator showing upgrade 6.0.34 is possible for NS700G.
Rainer_EMC
4 Operator
•
8.6K Posts
0
August 25th, 2014 04:00
Then there is an error in the procedure generator
From the DART 6 release notes:
Supported hardware When attempting to run USM on unsupported hardware
(CNS|CFS|NS350|NS500|NS600|NS700), the Celerra Upgrade Tool
will correctly exit but exit code is not passed back to the USM.
Therefore, the USM tries to continue the upgrade process but will fail
on the next step that interacts with the Celerra system.
From internal documentation for 6.0:
The following platforms are NOT supported in this release:
• C507 CS
• 516CS
• 517CS
• 514 DM
• 514T DM
• NS500
• NS600
• NS700
• NS350FS