This post is more than 5 years old
259 Posts
0
459
November 29th, 2010 07:00
Clariion CX300 Celerra
We have a clariion cx300/celerra frame. It has 4 front-end host ports (a0, b0, a1, b1) that are zoned to the datamovers only.
Can I share these sp ports for open systems and utilize the array for san attached hosts?
thanks.
Jim
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
November 29th, 2010 08:00
Ok – it sounds like you have a Celerra gateway conntected to a Clariion through Fibre Channel switches
In that case:
Fibre Ports on an CX series CLARiiON can be shared by multiple Celerras and other hosts (proper
zoning and storage group setup is required as documented in the setup guide for your platform).
Rainer
Rainer_EMC
4 Operator
•
8.6K Posts
0
November 29th, 2010 07:00
Hi Jim,
since there is no CX300 Celerra model please check what exact model you have.
Easiest way is to do a /nas/sbin/model on the control station
Rainer
jimkunysz
259 Posts
0
November 29th, 2010 08:00
it's a NS500G.
Navisphere Manager reports the frame as a CX300.
thanks.
jimkunysz
259 Posts
0
November 29th, 2010 09:00
great news. I'll have to find the setup guide for the frame.
Thanks.
Jim