Unsolved
This post is more than 5 years old
26 Posts
0
1659
September 11th, 2012 11:00
Celerra replicator v2
I'm facing trouble creating replication session, it gives the error "There are no destination pools available". last week i created a replication session and its still running, the problem started when I created a new storage pool on destination with different raid5 type(8plus 1).
source Celerra File Server Version: T5.6.52.208
destination Celerra File Server Version: T6.0.60.2
Attached screenshots.
Based on the error i found emc218026 and followed, it also gives the error .
Please suggest if anychanges required to create the session.
No Events found!
SamirGautam
57 Posts
0
September 13th, 2012 00:00
Hello Mothe
Are you able to validate the interconnect from source and destination? Once you have validated the interconnect, please check if you have enough free space in the storage pool.
Thanks
Samir
mothe
26 Posts
0
September 13th, 2012 09:00
there is already one replication session which is created prior to creating new storage pool is still running,the screenshots attached earlier shows enough storage in the pools. all the interconnects are validated.
SamirGautam
57 Posts
0
September 17th, 2012 01:00
Mothe
one more thing, please try to create a test file system from new storage pool.
Thanks
Samir
SAMEERK1
296 Posts
0
September 17th, 2012 04:00
paste the output of the command from destination Celerra:
nas_pool -size
Sameer