Unsolved
This post is more than 5 years old
14 Posts
0
1156
May 29th, 2012 06:00
Celerra NS120 FastVP
Dear expert, Did Celerra support Fast Cache? planning to create FastVP but doesn't whether its work in Celerra NS120 ? What's the requirement for storage to make FastVP?
No Events found!
dynamox
9 Legend
•
20.4K Posts
1
May 29th, 2012 06:00
http://www.emc.com/collateral/software/white-papers/h8046-clariion-celerra-unified-fast-cache-wp.pdf
dynamox
9 Legend
•
20.4K Posts
1
May 29th, 2012 06:00
misspeak, it is supported on CX4
MrRight
14 Posts
0
May 29th, 2012 18:00
Hi Dynamox, Mean it's not supported on Celerra?
dynamox
9 Legend
•
20.4K Posts
1
May 29th, 2012 19:00
it is supported, take a look the link provided earlier
dynamox
9 Legend
•
20.4K Posts
0
May 29th, 2012 22:00
i thought we were talking about support of Fast Cache on NS120
Rainer_EMC
4 Operator
•
8.6K Posts
0
May 29th, 2012 22:00
Which FAST - sub-LUN or complete LUN?
dynamox
9 Legend
•
20.4K Posts
0
May 30th, 2012 04:00
yet his/her first question is if Fast Cache is supported ..confused
Rainer_EMC
4 Operator
•
8.6K Posts
0
May 30th, 2012 04:00
Thread title says FastVP
Rainer_EMC
4 Operator
•
8.6K Posts
0
May 30th, 2012 06:00
Anyway – FAST Cache is available on CX4 based platforms including the NS-120/480/960 with Flare 30 and 30.5 and is supported for NAS and SAN LUNs
FAST tiering is a different matter – From what I remember CX4 could only do FAST v1 (aka Clariion FAST - full LUN movement ) and that was never supported for NAS LUNs
FAST VP sub-LUN tiering (1GB parts of LUNs) appeared with VNX and wasn’t available on CX4