Celerra FLARE question

Yep

Check if nas services are started.

df -k

/nas partition should be mounted..

I tried that command thru putty it says command not found

Hi,

FLARE is for the backend Clariion and the OS which run on Celerra is DART

to check backend FLARE version  :   /nas/sbin/navicli -h getagent

to check the Celerra DART version : nas_version

Thanks and Regards

Sameer Kulkarni

eServices

Customer Support Services

EMC²

Where information lives

Phone:080-43267923 | Email -  kulkarni_samer@emc.com

E-service at your fingertips: http://powerlink.emc.com

have you tried the command as root ?

also cat the file:

cat /home/nasadmin/.bash_profile

check if these entries are there

NAS_DB=/nas
export NAS_DB

nasadmin

logged in as root or nasadmin ?

Thanks and Regards

Sameer Kulkarni

eServices

Customer Support Services

EMC²

Where information lives

Phone:080-43267923 | Email - kulkarni_samer@emc.com

E-service at your fingertips: http://powerlink.emc.com

Ok then what

ls /nas/sbin/navicli

/nas/sbin/navicli -h spa getagent

look for Revision

You guys were all wrong it is - /nas/tools/nas_summary   This worked for me.

or maybe, just maybe you were doing something wrong ?

[nasadmin@NS80CS ~]$ /nas/sbin/navicli -h spa getagent

Agent Rev:           6.26.31 (2.70)

Name:                K10

Desc:

Node:                A-APM00073201740

Physical Node:       K10

Signature:           2023412

Peer Signature:      N/A

Revision:            3.26.80.5.031

SCSI Id:             0

Model:               CX3-80

Model Type:          Rackmount

Prom Rev:            5.15.00

SP Memory:           8192

Serial No:           APM00073201740

SP Identifier:       A

Cabinet:             SPE2