Unsolved
This post is more than 5 years old
7 Posts
0
489
February 3rd, 2012 09:00
Celera mirrorview or Celera Replicator
Hi all
i have two celera ns480 with SAN option .
i use mirrorview for replacate the SAN part of the NS
But for the NAS side , with essentially NFs use, i dont know if i can use Mirrorview or if i must by a specifique produc like Celera Replicator ?
thanks for your help
bye
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
February 3rd, 2012 11:00
You could use MirrorView/S but then its typically to mirror all file systems and your second system would be standby (not available readonly as in the Replicator case).
Take a look the VNX MirrorView for file manual on Powerlink – it should spell out the differences between using MV and Replicator
Both have their pro’s and con’s
Rainer