Unsolved
This post is more than 5 years old
2 Posts
0
305
January 30th, 2014 22:00
Can't mount iSCSI, errors in web interface
Moved our EMC Celerra NS500 to a new rack and am able to ping the SAN, but I can't connect/mount via iSCSI. Logged into the web control panel and saw the following:
Do I just need to restore the SP? Will there be data loss?
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
January 31st, 2014 08:00
did you label and re-cable evething the way it was before ?
INFX1409
2 Posts
0
January 31st, 2014 09:00
It should all be wired correctly. We actually just moved the rack, not the device, so nothing was unracked.
Per another forum post, I ran the failback command and SP A is no longer saying 'ready to be restored', and everything shows 'up', so I'm unsure what the problem could be.
We can ping the iSCSI IP address from the server we are trying to mount from, but get a "Connection Failed" every time we try to use MS iSCSI Initiator to connect.