This post is more than 5 years old
37 Posts
0
996
March 11th, 2011 10:00
Add a User Lun to Celerra NS-120; looking for White Paper
Hi all,
i´m looking for a White Paper how to add a User Lun to the Celerra. In detail i want to create LUN´s from a 12+2 Raid6 and present them to the Celerra. I tried to put the LUN into the Storage Group of the Celerra but within Unisphere i cant find the option to use this lun now.
Thanks for help
regards,
Martin
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
March 11th, 2011 10:00
I would suggest to open Powerlink, select Celerra Tools in the Navigator drop-down box and your model and then
Step 5 Configure for Production
Perform Common Post-CSA Tasks
Configure additional storage
You’ll find step-by-step instructions there – pay particular attention to using a HLU greater than 16
Rainer
MartinWidemann
37 Posts
0
March 11th, 2011 11:00
Ok the Information provided there are for Celerra Manager, but within Unisphere i can´t find the Rescan Button to make the new Lun available. Is there a Dokumentation for Unisphere too?
As i unterstand i do the following:
Create a Raid Group (in my case the 12+2 Raid6 i´m still created)
Bin a LUN
Add the Lun to the Storage Group of the Celerra with an HLU greater than 16
Go to the Celerra and Rescan for the new Lun (this is the point i´m looking for in Unisphere)
Kumar_A
2 Intern
•
727 Posts
1
March 11th, 2011 14:00
Go to Unisphere, select the Celerra as your system (not the SPs). In the system tab, there should be a button to "Rescan all storage systems". See the attached screenshot.
1 Attachment
Rescan.PNG