Unsolved
This post is more than 5 years old
2 Posts
0
15203
March 21st, 2013 11:00
Server image missing on the M1000e
Hi,
We have adquired a couple of M1000e chassis with 3 servers and an Equallogic. On the CMC web I can see only the image of the servers on the bays 2 and 3 and the Equallogic but not the server on the bay 1.
Clicking on it i can see all the details of the server without problems, only the image of the server is missing. If I change the blade to any other bay the image is shown.
The issue is happening on both chassis.
Firmware for Chassis and Servers is the last one.
Any clue about it?
Thanks.
No Events found!
LawrIT
2 Posts
0
April 3rd, 2013 13:00
We're having the same problem.
Karta
6 Posts
0
April 3rd, 2013 23:00
Hi,
May i know the CMC/iDRAC firmware version that your are using ? And please provide the Blade model. Thanks
Regards
Karta
Vincent Moore
2 Posts
0
April 4th, 2013 06:00
We are also having the same issue here. This applies not just to the CMC web interface but also the LCD display on the chassis itself.
The CMC firmware version is 4.30. The iDRAC firmware is version 1.30.30, build 43.
Thanks,
Vince
LawrIT
2 Posts
0
April 4th, 2013 06:00
Additional info ..... the Blade Chassis is M1000E and Servers are M620.
Vincent Moore
2 Posts
0
April 4th, 2013 07:00
As a follow up to my previous post, I checked and realized that there is a 4.31 firmware available for the CMC. I installed that and it seems that upgrading from 4.30 to 4.31 has resolved the issue.
Karta
6 Posts
1
April 4th, 2013 08:00
Issue is fixed in CMC 4.31 FW.