This post is more than 5 years old
1 Rookie
•
48 Posts
0
1225
June 27th, 2017 09:00
Move NDMP accelerator node from 7.1.1 avamar grid to 7.3.1-125 grid
Hi,
we have a NDMP accelerator node currently connected to multi node avamar 7.1.1-145_HF229688. we want to have the same node now connected to new avamar of version 7.3.1-125. is there any detailed steps to perform this task. i checked the NDMP guide but did not find any luck.
Thanks,
Chandan
No Events found!
L82lqvSg1212481
50 Posts
0
July 4th, 2017 15:00
Hello Chandan,
It's not necessary to setup any new account on the VNX side.
L82lqvSg1212481
50 Posts
0
July 3rd, 2017 17:00
Please follow the steps within 'Registering the accelerator' in NDMP user guide.
maharc
1 Rookie
•
48 Posts
0
July 4th, 2017 05:00
Hi leo,
thanks for the response. I will try out that steps and see if that helps. I was just wondering if in VNX we have to create any new account for the registration with new grid again.
Thanks,
Chandan
maharc
1 Rookie
•
48 Posts
0
July 6th, 2017 13:00
Hi Leo,
Thanks for all the help and guidance. I ran avregister command yesterday. we did not had to run the avsetupndmp again. the backup also completed successfully.