Unsolved
This post is more than 5 years old
1 Message
0
358
October 15th, 2017 08:00
Does the Management port eth5 need to be on its own subnet
I'm setting up a single Gen4T node
My Customer wants to configure as follows
RMC Dedicated
eth1 and eth2 as Bond0 with the following network , IP 164.181.230.91, 255.255.255.0, 164.181.230.1 will be default GW (on VLAN 230)
eth5 for management , IP 164.181.37.209, 255.255.255.128, 164.181.37.129 GW ( on 372 VLAN). My question is how do I add the second GW ? Can I use dpnnetutil to add the second GW to eth5 , or do I need to edit files. The system is new and the 7.5 SLES has not yet been installed.
No Events found!
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 20th, 2017 04:00
my avamar grid is multi-homed, there can only be one default gateway. You will have to set static routes so that your eth5 interface can route back to whatever management subnets your avamar admins reside on.