1 Rookie
•
2 Posts
0
80
February 10th, 2025 16:56
AW2725DF, unable to detect display signal, #2
I have the same monitor with the same problem. I was able to use my new pc and monitor completely fine before i unplugged it to move it. (After i turned it completely off) But now it just won't turn on. My pc boots up and i can even get into the bios but other than that the monitor just says "no DP signal from your device" searching for a solution is driving me insane since nothing works and all solutions say to check the connection like i haven't tried that already. My new DP or HDMI cables don't work. Plugging in the cable after turning on pc didn't work for me either. When no cables connected there is no message and the monitor wants to go into standby mode. But as soon as i plug in the cable it says no do signal from your device. Horrible buy for 1200 bucks.
VloeibareVreemdeling
1 Rookie
•
2 Posts
0
February 11th, 2025 18:20
My bad , after trying a different monitor, i notice my motherboard display keeps saying d6 7f and 5c wich apparently are types of errors , still very disappointed as the thing cost 700 bucks with the complete build costing about 5k. Everything worked fine for 4 weeks but now i have this. Sorry for my false problem haha
(edited)
JOcean
9 Legend
•
12.6K Posts
0
February 10th, 2025 17:45
That sounds more like a PC problem than the monitor which you are probably already aware of. Just wondering if you plugged the video cable into the onboard port rather than the discrete display card port. Inasmuch as you moved the system it is an easy mistake to make.
JOcean
9 Legend
•
12.6K Posts
0
February 11th, 2025 19:36
@VloeibareVreemdeling At least the MB should have a warranty.