Unsolved
1 Rookie
•
32 Posts
0
100
June 4th, 2025 02:40
Aurora R15, RTX 5090 Founders Edition upgrade
Looks like an RTX 5090 Founders Edition will fit in the R15….
It’s a bit tight but it fits, I was even ti put the fan shroud that direct air to it back in. Although I chose to leave it out as this card has that end blocked off. 
No Events found!
Jean_Moulin
1 Rookie
•
2 Posts
0
July 20th, 2025 03:10
Did you use the existing 4090 connector? Or did you have to use a different connecting cable?
Mendomar06
1 Rookie
•
32 Posts
0
July 21st, 2025 12:40
@Jean_Moulin they share the same 12VHPWR connector, although the one coming from the PSU has a 90 degree angle on it so it didn’t physically fit as the 5090 has that angled connector. I had to use an extension without the 90 degree connector to be able to connect it.
Jean_Moulin
1 Rookie
•
2 Posts
0
July 21st, 2025 18:09
What extension did you get? Is it working? Where did you get it? Can you link me to it?
thanks.
Mendomar06
1 Rookie
•
32 Posts
0
July 21st, 2025 19:22
@Jean_Moulin EZ DIY Fab, yes it works, got it off of Amazon.
https://a.co/d/5MGztak