Unsolved
This post is more than 5 years old
1 Message
0
2698
March 4th, 2019 23:00
Alpha R2, needs to reconnect to graphic amplifier
My alienware alpha R2 tells me to reconnect my graphic amplifier when I boot . But when I do connect the graphic amplifier, it doesn't start and the same message appears on the screen and so I cannot start my computer
last time I shut the computer I click on the ondock button on the cable to ondock the amplifier
If you got any solution please respond as fast as you can.
thanks
(sorry for the broken english)
No Events found!
A51-06
5 Practitioner
•
3.1K Posts
0
July 4th, 2020 11:00
Disconnect the power and the graphics amp.
Open it up and disconnect the CMOS for 5 minutes.
Then, reconnect the cmos and reassemble.
Since your opening it, I’d open the heatsinks and repaste the CPU and GPU in your Alpha.
dust it out a little bit and your finished!